    |
|
|
     |
|
|
| Type and Major Components | |
| Type: | IX240 autofocus/auto exposure single-lens reflex camera with focal plane shutter, built-in motor drive and built-in flash |
| Lens Mount: | Canon EF mount with fully-electronic signal transfer system |
| Compatible Lenses: | Canon EF lenses. |
| Viewfinder: | Fixed eye-level pentaprism. Gives 95% coverage and 0.6x magnification (with 40mm lens at infinity) |
| Dioptric Adjustment: | Adjusted to 1 diopter |
| Focusing Screen : | Fixed, new laser-matte screen |
| Shutter: | Vertical travel, focal-plane shutter with all speeds electronically controlled |
| Shutter Speed: | 30 to 1/4000 sec. (in half steps) and bulb. X-sync at 1/200 sec. |
| Autofocus | |
| AF Control System: | TTL-CT-SIR (Through-the-Lens
Cross-Type Secondary Image Registration) multi BASIS (Base Stored Image Sensor) with
the following 4 possible settings, 1. One shot AF 2. Predictive AF with AI Servo AF 3. AI Focus AF 4. Manual focusing |
| AF Working Range: | EV 2-1.85 (at ISO 100) |
| Focusing point selection: | Automatic: Camera-selected; Manual: User-selected with button and dial |
| AF-assist beam: | Built-in AF assist beam emitted automatically at the current focusing point area |
| Exposure Control | |
| Metering system: | TTL metering at maximum
aperture with a 6-zone silicon photocell., 1. Evaluative metering (linked to the focusing point) 2. Partial metering (covers around 6.5% of the viewfinder area) 3. Centreweighted average metering |
| Metering Range: | EVI-20 (at 20°C with 50mm f/1.4 lens, ISO 100) |
| Exposure modes: | 1. Intelligent Program
AE (Shiftable) 2. Shutter speed-priority AE 3. Aperture priority AE 4. Depth-of-field AE (Shiftable) 5. Full auto 6. Programmed Image Control (Portrait, Landscape, Close-up, Sports, Night Scene) 7. E-TTL program flash AE 8. A-TTL program flash AE 9. TTL program flash AE 10. Metered manual |
| Camera Shake Warning: | Provided with Full Auto and Programmed Image Control modes. Shutter speed display blinks if the shutter speed is slower than the reciprocal of the lens' focal length by more than 1.25 stop |
| ISO Film Speed Range: | ISO 25-8000 is set automatically in one-third steps |
| Exposure Compensation: | |
| Auto Exposure Bracketing: | ± 2 stops in half stop intervals. Sequence: correct exposure, under exposure, over exposure in all film advance modes |
| Film Transport | |
| Film Loading: | Drop-in loading and automatic advance to the first frame or to the first unexposed frame with a partially-exposed film cartridge |
| Film advance: | Film advances automatically by either a single-frame or continuously (approx. 2.5 frames per sec. max.) |
| Film Rewind: | Automatic at end of the roll. Mid-roll rewind possible. |
| Built-In Flash | |
| Type: | Retractable TTL auto flash |
| Guide Number : | (ISO 100) 11 metres |
| Flash Coverage Angle: | Covers the angle of view of a 22mm lens |
| Recycling Time: | Approx. 2 sec |
| Firing Conditions: | Flash fires automatically in low-light or backlit conditions in the Full Auto, Portrait, Close-up and Night Scene mode. (In a creative zone mode, forced flash firing and flash button.) |
| Flash exposure aperture: | Automatically set by the TTL program in the Full Auto and "P" modes. Manually set in the AV and manual modes. In the TV mode: automatically set to match the set shutter speed |
| Flash sync speed: | Automatically set between 1/60 and 1/200 sec. in Full Auto and "P" modes. In the AV mode it is automatically set between 30" and 1/125 sec. to match the set aperture. In the TV and manual modes sync speed can be manually set to 1/125 sec. or slower in half steps (with EX-series flashlights, shutter speeds up to 1/4000 s. can be set) |
| Flash metering: | Through-the-lens off-the-film autoflash metering (linked to the focusing points) |
| Flash exposure compensation: | ± 2 stops in 1/2 stop intervals |
| Red-eye reduction: | With the built-in flash popped up, the red-eye reduction lamp lights automatically in low light in the Full Auto, Portrait and Night scene modes. The shutter release is not locked while the lamp is on |
| Power Source | |
| Battery: | Two DL123A (or CR123A) lithium batteries |
| Dimensions | |
| Size (mm): | 132.2 (W) x 79.5 (H) x 58.5 (D) |
| Weight (body only): | 440g |
| IX (Information Exchange) Imprinting | |
| Print format: | C, H, or P format is selectable with the print format button. When the C or P format is selected, the LCD mask is displayed on the viewfinder screen |
| Imprinting feature: | A) Backprinting,
the following information is always printed on the back of the print 1. Date & time 2. Focal length 3. Maximum aperture 4. Shutter speed 5. Aperture 6. Exposure compensation amount (the imprinting style depends on the photo-finisher) B) Front printing, one of the following items can be imprinted on the front of the print 1. Blank 2. Month, day, year 3. Day, month, year 4. Year, month, day 5. Hour, minute (Front printing may not be possible with some photo finishers. The style, size, colour and, position of the imprinted information depends on the photo finisher) |
| Imprinting preconditions: | A) Fixed Time Printing
Mode, The FTPM IX data is recorded magnetically during film rewinding B) Series scene, series scene IX data is recorded magnetically automatically when a series of shots is taken using autoexposure bracketing or AE lock |
| Weight and dimensions are approximate. Errors and omissions excepted. Subject to change without notice. | |