    |
SPECIAL CUSTOM FUNCTION
04
Switches between focusing points. When the shutter button is partially depressed,
pressing the focusing point selector toggles between the camera-selected focusing
point and the centre focusing point. This means that the active focusing point can
be changed without interrupting the shooting.
SPECIAL CUSTOM FUNCTION 05
Illuminates the active focusing point. When the shutter button is partially depressed,
the focusing point lights up so that you can see which focusing point is active.
However, this SCF can only be used with manual exposure (the illuminated focusing
point can affect automatic metering in low light). Other conditions also apply to
this SCF.
SPECIAL CUSTOM FUNCTION 06
Switches focusing point selection to automatic. When Custom Function 11-2 is being
used (AF focusing point user-selected with Quick Control Dial), pressing the focusing
point selector while the shutter button is partially depressed will switch the focusing
point selection mode to automatic. This is useful for sports photographers who find
their middle distance subject suddenly moves closer and fills the frame.
SPECIAL CUSTOM FUNCTION 07
Allows Quick Control Dial to set focusing point mode. The focusing point selection
mode can be toggled between manual and automatic using the Quick Control Dial instead
of the Main Dial. (Not available for EOS 1N RS)
SPECIAL CUSTOM FUNCTION 08
Enables continuous shooting with AEB. With auto exposure bracketing (AEB), shooting
normally stops after the three frames are exposed, even if you continue to hold the
shutter release down. With this SCF, sets of AEB frames are exposed, one after the
other, for as long as you press the shutter button (or until the film runs out).
The exposure is metered at the start of each new set.
SPECIAL CUSTOM FUNCTION 09
Limits AEB to two frames. Automatic exposure bracketing is terminated after two exposures.
The standard Custom Function 9 can still be used to change the bracketing sequence.
SPECIAL CUSTOM FUNCTION 10
Allows continuous AEB with self timer and mirror lock. Normally, when the self timer
and mirror lockup have been set (CF 12 set to 1), you have to press the shutter button
three times to expose the three AEB frames. This SCF allows the three frames to be
exposed continuously with one press of the shutter button. (Not applicable to EOS
1N RS)