Filters     Close-up Accessories     Speedlites and Accessories     Other Accessories

Angle Finder B Provides a viewing lens at right-angles to the camera eyepiece. Useful for low-angle photography, and shooting with the camera on a copy stand. Rotates for vertical and horizontal format shooting. Gives an upright image, the correct way round, for convenient composition. When used with EOS 5 or EOS 50 this finder requires use of the Canon Adapter Ed for Angle Finder B. Power Drive Booster E1 Increases the motor drive and AF capabilities of the EOS-1N and EOS-1. Film advance is increased from 2.5 fps to a maximum speed of 6 fps (5.5 fps with EOS1). Continuous shooting using focus prediction control increases from 2 fps to 5 fps (4.5 fps with EOS-1). There are three shooting modes: 'CH' (6/5.5 fps), 'CL' (3/2.5 fps) end 'S' (single). The excellent handling characteristics of the EOS-1/EOS-lN are retained, with separate shutter and AE Lock buttons provided for using the camera in the vertical format position. The Hand Strap E1 (optional) provides maximum security in use. Powered by eight AA-size alkaline-manganese batteries, or eight AA-size lithium batteries (EOS-1N only), or the Ni-Cd Pack E1. Battery Magazine E1 Supplied as standard with the Power Drive Booster E1, holds eight M-size alkaline-manganese batteries. A spare magazine will allow rapid battery changeover. Ni-Cd Pack E1 Ni-Cd pack for the Power Drive Booster E1. Especially effective at low temperatures. A full charge provides enough power for approximately 30 rolls of 36-exposure film at -20°C. Ni-Cd Charger E1 Dedicated charger for the Ni-Cd Pack E1. Two packs can be charged at the same time. The recharge time is only 90 minutes. By attaching a plug adapter, the unit can be charged with power sources from AC 100 volts to AC 240 volts for use anywhere in the world. Battery Pack BP-E1 Battery Pack BP-ET is an alternative to the Power Booster E1 when an increase in EOS 1N shooting speed (fps) is not required. The pack takes four AA-size alkaline manganese or rechargeable Ni-Cd batteries which can be used in place of the camera's 6 volt 2CR5 lithium battery. A switch on the base of the pack allows you to select either the camera battery or the BP-ET batteries. The Battery Magazine BM-1, which holds the four AA-size batteries, is also available separately. Battery Pack BP-50 The BP-50 is both a battery pack and a vertical grip for the EOS 50E/EOS 50. It uses four easily obtainable size-AA alkaline or rechargeable Ni-Cd batteries, or a 2CR5 lithium battery. The grip has its own shutter button with On/Off switch. It can be connected to a high-capacity power pack (BP-5B) for heavy-duty use. Battery Pack BP-5B For extended outdoor use, the BP-5B uses 4 size D alkaline batteries. Can only be used with BP-50. (Cover for BP-50 included.) Battery Pack BP-8 The BP-8 is both a battery pack and vertical grip for the EOS 500 and EOS 5000. The battery pack uses four readily available alkaline-manganese or rechargeable Ni-Cd size AA batteries. Grip GR-E1 Supplied as standard with EOS 1. GR-80TP Grip Extension GR-80TP Grip Extension features a built-in mini tripod. Vertical Holding Grip VG-10 Screws to base of EOS 5, and is equipped with shutter button, AE Lock button, main dial and focusing point selection button for easier handling when camera is held vertically. Grip GR70 Attaches to the tripod socket in the base of the EOS 100, 1000FN or 1000N to form a single unit with the camera body. Particularly useful when handling telephoto lenses. Command Back E1 Offers data imprinting and timer functions. Data such as year/month/day or day/hour/minutes, six digit user-selected numbers, or consecutive frame numbers can be printed in the bottom right of the film frame at the time of exposure. Timer functions include a variable delay self-timer, an interval timer, and a long exposure timer. Quartz Date Back E Features a built-in quartz-controlled auto calendar programmed with dates to the year 2029. In addition to date/time imprinting, arbitrary six digit numbers, or four-digit consecutive frame numbers can also be printed. (With EOS RT, the 'real time' mode cannot be used when the Quartz Date Back E is attached.) Technical Back E The Technical Back E expands the functions of compatible EOS cameras. It will print the date or time on each frame and will automatically record exposure information for up to 361 frames. It provides advanced auto exposure bracketing for up to + or - 5 stops. Intervalometer functions are provided for automatic time-lapse photography and timed shutter release. The Back also provides Variable Program Shiff for customized AE programs to meet any shooting requirements. The Keyboard Unit E (supplied with the Technical Back E) is a dedicated keyboard which allows you to input comments in five languages (English, French, German, Spanish and Japanese). Up to 30 characters of random information can be recorded for each frame. The Interface Unit TB connects the Technical Back E with an IBM compatible computer. It downloads exposure data and other information to the computer and also allows computer-controlled operation of the EOS camera.